Bosch Benchmark B36IT800NP Manual de instalación descargar pdf (Pagina 13)

1. Attaching the anti-tip-brackets

, WARNING:

Risk of injury and damage!

Assure that there are no electrical wires or

plumbing in the area which the screws could

penetrate.

, CAUTION:

Risk of injury! Always wear safety glasses and

other necessary protective devices or apparel

when installing or working with dowels.

Note:

 2 anti-tip-brackets are required for the appliance.

 The supplied set contains fastening screws for

various applications. Select the fastening screws

according to the local conditions.

The anti-tip-brackets (a) must overlap a minimum of

” (54 mm) over the appliance to secure the

appliance.

If this minimum length cannot be observed for structural

conditions it is possible to do this by fastening

a spacer (b) behind the anti-tip angle, e.g. a sufficiently

dimensioned wood board.

The length of the plank should correspond to the width

of the installation niche!

1. Specify the attachment points of the anti-tip-brackets

according to the section on “Installation

dimensions”.

2. Attach the anti-tip-brackets completely.

Be sure screws hold tight.

Important notes for fastening with dowels and screws:

 Not recommended for use in light-weight masonry

material such as cinder block.

 Not recommended for use in new concrete which

has not had time to cure.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 75 76

Sin comentarios

Bosch Benchmark B36IT800NP Manual de instalación Pagina 13